MARK OILS 65 Non-melt synthetic grease, are high temperature bearing grease. Formulated with highly refined synthetically fortified fluids with rust and corrosion inhibitors to provide protection in wet environments and high temperature.
MARK OILS 65 Is formulated in such a manner that it will not form hard carbon deposits and will actually help remove and eliminate both rust and corrosion, because of the synthetic additives that are blended into this product, also will not bleed or run off due to expreme pressure or high temperatures.
MARK OILS 65 Non-Melt Grease. Suitable for practically every greasing operation with all types of equipment. Excellent metal adhesion even on moving parts highly recommend for any type of oven or other high temperature application, also retains its lubricity and continues lubricating even under high heat conditions. It is expremely water resistant and is recommended for bearings on machinery that is working in wet conditions or exposed to large amounts of water.
Specification
NLGI GRADE |
2 |
WORKED PENETRATION @ 77f |
ASTM D-217 METHOD: 60 STROKES |
250-260 |
ASTM D-217 METHOD: 10,000 STROKES |
265-295 |
MELTING POINT : F MIN: ASTM D-566 |
WILL NOT MELT |
MINERAL OIL BAKE OUT POINT |
700+ |
TEXTURE |
SMOOTH/TACKY |
OXIDATION STABILITY: ASTM D-942 |
GOOD |
RESISTANCE TO WATER |
EXCELLENT |
WEAR RESISTANCE |
GOOD |
PUMPABILITY YEAR ROUND |
GOOD |
WORKING TEMPERATURE RANGE , F |
-20 TO 1000 F |
EXTREME PRESSURE PERFORMANCE |
EXCELLENT |
OIL VISCOSITY @ 210F, SUS |
140-170 |
